SOS Device Configuration Summary

The Device Configuration Screen

The Device Configuration screen displays a listing of hardware and pseudo devices that are configured on the system. Figure 25.1 shows an example of the screen.

Figure 25.1 SOS Device Configuration screen

To access the Device Configuration screen from any SOS display screen:

Type s from the SOS Enter command: prompt to view the Screen Selection Menu screen.

From the Screen Selection Menu screen, enter h (Device Configuration). The Device Configuration screen will display.

Device Configuration Screen Display Items

The data items reported in the Device Configuration Summary are described in Table 25.1.

Table 25.1 SOS DEVICE CONFIGURATION data items

Data Item	Description
Driver	The kernel driver name.
Class	The device category defined in /usr/conf/master.d.
I	The Instance number associated with the device. The instance is a unique number assigned to a device within a class. Pseudo devices do not have instances.
HW Path	The address of the hardware components leading to the device address, listed sequentially from the bus address to the device address.
HW Type	The identification for the device's hardware component: UNKNOWN - Unrecognizable hardware PROCESSOR - processor MEMORY - memory BUS_NEXUS - bus converter or bus adapter INTERFACE - interface card DEVICE - device NO HARDWARE - Not a hardware component
SW State	The state of the software driver controlling the hardware component: CLAIMED - Software bound successfully UNCLAIMED - No associated software found DIFF_HW - Hardware found does not match software NO_HW - Hardware is not responding ERROR - Hardware is in an error state SCAN - Node locked, try again later OK - No errors reported